Compaq HP NX7400-NX9420
Compaq HP NX7400-NX9420

Author Topic: Compaq HP NX7400-NX9420  (Read 1102 times)

Offline Admin

  • Administrator
  • Full Member
  • *****
  • Posts: 170

    • View Profile
    • forumicro.com
Compaq HP NX7400-NX9420
« on: September 03, 2013, 11:10:02 AM »
Problems to install Windows :
1) Non-System disk or disk error, replace and strike any key when ready"
2) A disk read error occurred, Press Ctrl+Alt+Del to restart
3) Blinking cursor and no error message.
4) Low level driver HPDSKFLT.SYS causing system boot up problem.


SOLUTION
-Start or reboot the notebook PC.
-Press F10 when the HP logo displays. The BIOS Setup Utility starts.
-Select System Configuration , then Device Configuration .
CHANGE
-Ensure that HDD Translation mode is set to LBA - assisted .
-SATA Native Mode to Disable , and then install the operating system as you normally would.
SAVE CHANGENS AND EXID THE BIOS .

Dont forget install drivers for SATA AHCI !!
« Last Edit: September 03, 2013, 11:12:32 AM by Admin »